There are no more items in your cart
Amplificador MiniKom MATV + FI 5e/1s EasyF FM-VHF-UHF-UHF-FI
Configurable header amplifier for SMATV systems with separate amplification that guarantees the absence of intermodulation between inputs. It consists of 5 inputs: FM-VHF-UHF-UHF-FI, those of VHF and UHF have the two selectable gain margins while the FM input has a single amplifier stage. Stage of FI incorporates a switch. Televes 562210
Central broadband MiniKom EasyF. outputs: FM-VHF-UHF-UHF-FI.
Configurable header amplifier for SMATV systems with separate amplification that guarantees the absence of intermodulation between inputs.
It consists of 5 inputs: FM-VHF-UHF-UHF-FI, those of VHF and UHF have the two selectable gain margins while the FM input has a single amplifier stage. In the FI stage, it incorporates a switch for selecting the power supply of the LNB in local mode (through the source itself) or remote (through an external STB).
They incorporate anti-LTE filtering and a led signal indicator in the output for the immediate detection of faults in the network.
Stands out for
- Very compact size (103x103x 50mm)
- LEDs indicating the existence of signal in output and power
- Configurable gain through a switch (high / low) and high output level
- Two stages of amplification for TV bands
- Switched power supply that guarantees low consumption
- EasyF connection system
- High armor chassis, manufactured in Zamak
Features
- Test output (-30dB)
- Intuitive front cover, with settings and block diagram
- LNB power selection switch: local or remote
- DC ON/OFF switch for the passage of VHF and UHF inputs, for powering preamplifiers or BOSS systems
- Screw on the wall
EasyF connection system: simplicity and savings
The EasyF is an innovative concept of connecting the internal conductor of the coaxial cable (live), which is inserted directly into the device increasing the reliability of the connection. In addition, thanks to the absence of "F" connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.
- Real time saving: accelerating the installation is possible, since it is not necessary to make the connectorization of the coaxial cables.
- In addition, the threading process of the connectors in the device is avoided, which sometimes gets complicated when the space is not enough
- Reliability of connection: the flange that holds the cables prevents the coax from coming loose
- Economical savings: no additional connector (or "F" or "CEI") is needed
- Optimization of the space: the entrances and exits are always located on the same side of the device, avoiding to bend the coaxial cables and facilitating the work inside cabinets and registers
- Very simple assembly in three steps: only it is required to screw and unscrew the covers to connect two cables:
1. Unscrew the lid of the device to access the connection
2. Insert the pre-stripped coaxial cables
3. Close the cover and screw in to secure the connection
Discover more about the reliability of the EasyF system
With EasyF, the connection of the coaxial cable in the device is made by an automated system of insertion of the live (internal conductor) by contact, without requiring welding.
- Like the first day: the life time of the device increases when eliminating the possible deterioration of the welds with the passage of time
- Reduction of the failure rate: generally produced by cold welding
- Optimization of electromagnetic behavior: at high frequencies
- Reinforcement of our commitment to the environment: the contamination caused by the welding process is eliminated and the electricity consumption in production is reduced
Specifications
Bandas | UHF1-UHF2 | VHF | FM | SAT | |||
Margen de frecuencias | MHz | 470...790 | 174...400 | 88...108 | 950...2150 | ||
Ganancia | 0 | dB | 36 | 32 | 13 | 42 | |
10 | 26 | 22 | |||||
Margen de regulación de ganancia |
Manual 0 ... 20 |
Manual 0 ... 20 |
Manual 0 ... 20 |
Manual 0 ... 30 |
|||
Ecualizador entrada | - | - | - | Manual 0...15 |
|||
Nivel de salida | IMD3 (2ch, -35dB) | dBμV | 122 | 121 | 121 | 123 | |
DIN 45004B | 115 | 114 | 114 | - | |||
IMD3 (2ch, -60dB) | 112 | 111 | 111 | - | |||
IMD2 (2ch, -60dB) | - | 103 | - | - | |||
Figura de ruido | dB | 8.5 | 6.5 | 10 | - | ||
Test | -30 | ||||||
Alimentación local entradas | V | - | 12 | ||||
Corriente máx. entradas | mA | - | 400 | ||||
Alimentación remota entradas | V | - | VRX | ||||
Paso máx. de corriente alimentación remota LNB | mA | - | 500 máx. | ||||
Alimentación entradas | V | 12 | - | 12 | - | - | |
Corriente máx. entradas | mA | 200 | - | 200 | - | - | |
400 máx. | |||||||
Tensión / frecuencia de red | V~ /Hz | 196 - 253 / 50-60 | |||||
Consumo total AC sin alimentación de entradas | OFF | W, mA | 6.5/70 | ||||
Consumo total AC sin alimentación de entradas | ON | W, mA | 12.5/120 | ||||
Índice de protección | IP | 20 | |||||
Margen de temperatura de funcionamiento | ºC | -5 ... +45 |
Summary
0
0 Reviews
Only users who already bought the product can add review.
No customer reviews for the moment.