• -15%
180 SE RPR / Upper section w/ring 2,5m (Towers) Televes
search
  • 180 SE RPR / Upper section w/ring 2,5m (Towers) Televes
  • 180 SE RPR / Upper section w/ring 2,5m (Towers) Televes
  • 180 SE RPR / Upper section w/ring 2,5m (Towers) Televes
  • 180 SE RPR / Upper section w/ring 2,5m (Towers) Televes
  • 180 SE RPR / Upper section w/ring 2,5m (Towers) Televes

Upper section with rim 2.5m turret series 180 SE RPR Televes

Tower series 180 SE upper section of 2.5m built with stainless steel RPR. Maximum height is 7.5 m, including 3m mast. Televes 3015

star star star star star
€141.54 €166.52 Save 15%
Tax included
Reference televes-3015
Brand Televes
Quantity
Available in 24/48h

Free shipping
180 SE RPR / Upper section w/ring 2,5m (Towers) Televes

Upper section with rim 2.5m turret series 180 SE RPR Televes

€141.54 €166.52 Save 15%

This product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here

Upper section constructed in steel, to which a "zincado brillante + bichromate" base treatment is applied, they are used in two types of finishes (RPR or polyester paint). They currently allow installation at heights from 1 to 50.5 m.

Depending on the model, they implement threaded or plug-in fittings (SE finish) for their union.

The series 180SE, allows to cover the most basic needs of catchment with its recessed sections. The maximum height is 7.5 m, including 3m mast. 

Installation types (Mod. 180 y 360)

Section by section

Fixing the lower section to the base in the proper vertical position, and then mounting the consecutive intermediate sections, which will be fixed with the corresponding guy-wire; the assembly is carried out by climbing the already placed sections and raising subsequently the section to be placed, using for it the adequate elevating tools.
The climbing has to be made with the appropiate safety conditions (safety-belt, anchoring, etc.); there won’t be more than two sections without shoring up. In case of coinciding two sections without guy-wire, auxiliary guy-wire will be used for the bracing of the sections during the set-up. The tower will be balanced adjusting the tension of the guy-wire and the using of proper balance-appliances.

Complete tower

First assembling the tower over the ground and raising it, once mounted, by means of a crane. This system can be used only with towers of heights lower than
18 meters in the model 180 and heights lower than 26 meters in the model 360.

Safety

If the installation of the tower is made on the roof, flat roof or other place of a building, the installer will take the necessary measures according to the indications of the architect responsible of the building, in order to know the mechanical resistance of these zones.

Specifications

Model 180 SE
Main steel pipes 20x1.5
Transversal stainless steel rods mm 6
Max. height with mast 3m m 7.5
Length m 2.5

Data sheet

Supports
Floor

Summary

0

star_border star_border star_border star_border star_border

0 Reviews

Only users who already bought the product can add review.

Write your review

monetization_on Write your review and get voucher for discount 3%
*valid for 60 days

No customer reviews for the moment.