Fibaro FGD-212. Remotely controlled Dimmer 2 FIBARO light dimming module. Designed to work with various types of light sources. Can be used as a switch with non-dimmable light sources. Compatible with any Z-Wave or Z-Wave Plus controller. Compatible with all VESTA panels (Z-Wave). Advanced microprocessor control. Intelligent light source detection algorithm implemented. Automatic setting of the control mode appropriate to the connected load. Active power and energy measurement functionality. Soft start function. The memory of the last light level settings. It works with various types of switches: momentary, toggle, three-way, etc. Active element: semiconductor electronic switch. To be installed in-wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations FGD-212 is an extension unit Fgd-212 zw5 dimmer 2.

Specifications

Radio protocol: Z-Wave

Radio signal strength: up to 1mW

Radio frequency: 868.4MHz, 869.85MHz (EU)

Radio signal strength: up to 6 dBm (EIRP)

Distance: up to 50 meters outdoors, up to 30 meters indoors (depending on building materials)

Device temperature protection: 105 ° C

Active element: semiconductor electronic switch

Device control: remote via radio or directly via external switch

Compatible with all VESTA panels (Z-Wave)

Current: 0.25 ~ 1.1A

Consumption: <1.3W

Operating temperature: 0 ° C ~ + 35 ° C

Dimensions: 42.5 (W) x 38.25 (H) x 20.3mm

To install in boxes: Ø≥50 mm

- FIBARO-002