Wi-Tek WI-AP219AX. Indoor wall-mountable Wi-Fi 6 access point. Compatible with 802.3 PoE power supply, 12V DC local power supply. Dual network port design supports expansion of third-party devices and meets the needs of more network scenarios. Compatible with 802.11a/b/g/n/ac/ax Wi-Fi protocol, 802.11ax protocol adopts OFDMA, 1024QAM, MU-MIMO and other key technologies to support higher speed and more user access. It offers fast wireless roaming and wired connectivity, ideal for use in hotels, retail stores, offices and more. PoE power supply not included, sold separately. Ultra-fast wi-fi 6 speeds: 3550mbps wi-fi speeds.

• Wireless standards: IEEE 802.11ax/ac wave2/wave1/n/b/g/a
• Operating bands: 2.4 GHz and 5 GHz
• Antenna: 2.4 GHz: 3 dBi, 5 GHz: 3 dBi
• Spatial fluxes: 2.4 GHz: 4x4 MIMO 5 GHz: 4x4 MIMO
• Signal rate: up to 1148Mbps at 2.4 GHz, up to 2402Mbps at 5 GHz
• Receiver sensitivity:
• 2.4 GHz

  802.11b: -85dBm@11M -92dBm@1M

  802.11g: -72dBm@54M -90dBm@6M

  802.11n Ht20: -70dBm@MCS7 -88dBm@MCS0

  802.11n Ht40: -68dBm@MCS7 -86dBm@MCS0

  802.11ax Ht20: -60dBm@MCS11 -85dBm@MCS0

  802.11ax Ht40: -56dBm@MCS11 -85dBm@MCS0
• 5GHz

  802.11a: -72dBm@54M -92dBm@6M

  802.11n Ht20: -70dBm@MCS7 -90dBm@MCS0

  802.11n Ht40: -68dBm@MCS7 -88dBm@MCS0

  802.11ac Ht20: -70dBm@MCS7 -90dBm@ MCS0

  802.11ac Ht40: -68dBm@MCS7 -88dBm@ MCS0

  802.11ac Ht80: -58dBm@MCS9 -85dBm@ MCS0

  802.11ax Ht20: -62dBm@MCS11 -88dBm@MCS0

  802.11ax Ht40: -58dBm@MCS11 -86dBm@MCS0

  802.11ax Ht80: -55dBm@MCS11 -84dBm@MCS0
• Maximum transmit power: <20dbm
• Interface: (2) 10/100/1000M/2.5G Base-T Ethernet ports
• Power supply: DC 12V/2A (not included), 802.3at PoE compliant
• Power Consumption: <22W
• PoE power supply not included
• Optional power supply: WITEK-0065 (WI-POE65-2.5G-30W)
• Installation: Wall mount
• External buttons: Reset button (long press for 8 seconds to restore factory default settings)
• Dimensions: 198 mm * 198 mm * 41 mm
• Operating temperature: -20 ? ~ 55 ?
• Storage temperature: -40°C~70°C
• Operating humidity: 5%~95% (non-condensing)
• Storage humidity: 5%~95% (non-condensing)
• Operating mode: Fit AP, Fat AP, repeater, WISP mode
• Wireless function: Up to 16 SSIDs, SSID hiding support, wireless radio enable/disable, RF parameter configuration
• Roaming: Layer 2 roaming support
• Wireless security: captive portal authentication, static whitelist and blacklist, wireless isolation between clients, SSID to VLAN
• Mapping, 802.1X support, WPA/WPA2/PSK/WPA/WPA/WPA2-
• Enterprise support
• Routing: Supports static IP, DHCP, PPPoE dial-up access
• Management: local management support with web, remote management support with Wi-Tek Cloud platform
• Platform management functions: RF auto-tuning via platform,
• Unified configuration via platform, Unified monitoring via platform.
• PoE power supply not included, sold separately

- WITEK-0050