Wi-Tek WI-PS205HV2 Wi-Tek Unmanageable PoE switch in economical…

Wi-Tek WI-PS205HV2. Wi-Tek Unmanageable PoE switch in economical range. 4 PoE 10/100 Mbps ports. 2 UPLINK RJ45 10/100 Mbps ports. 40W total PoE delivery Supports 802.3af/at PoE. CCTV mode up to 250 m. Watchdog PoE. Plug & Play without configuration 4fe + 2fe uplink ports 250m long range poe switch with 4poe port.

Wi-Tek provides a robust and cost-effective PoE solution to power your cameras, access point and other IP-based devices up to 250m away. Most reliable features such as, CCTV Extend mode, Watchdog PoE function, port isolation, provide added value to basic networking needs, creating a versatile and reliable surveillance network.

CCTV Mode Extend. Long distance PoE up to 250m

DIP switch provides Extend mode. All PoE ports can transmit data and power up to 250 metres. No additional hardware or configuration is required, it is easy to use and saves costs.

Perfect for the deployment of surveillance cameras over large areas.

Watchdog PoE. Automatically reboots your cameras if they don't work.

When the switch detects that it has lost signal from one of the PoE devices, it automatically restarts the port to attempt to re-establish signal with the device.

Port isolation to prevent Broadcast Storm

With VLAN mode, all PoE ports can only communicate with Uplink ports.

Prevents data leakage between each port and prevents Broadcast Storm.

Dual uplink to eliminate bandwidth capping

Uplink sockets to connect to other devices in an upstream topology with higher speed.

Specifications

• Wi-Tek Unmanaged PoE Unmanaged PoE Switch in the budget range
• 4 PoE RJ45 10/100Mbps PoE ports
• 2 10/100Mbps Uplink Ethernet RJ45 ports
• 40W total PoE delivery
• PoE 802.3 af/at PoE standard
• Forwarding Type: Store-and-Forward
• MAC Addresses: 2K
• Packet forwarding rate: 0.89 Mbps
• Jumbo Frame 2KB
• CCTV mode up to 250 meters
• VLAN Port
• Watchdog PoE
• MAC address auto-learning
• Automatic store and forward
• IEEE 802.3x flow control for full-duplex mode
• Backpressure for half-duplex mode
• Power supply: 110V ~ 240V AC, 50/60 Hz
• Power consumption: Max. 40W (with PoE devices connected)
• Operating temperature from -10°C ~ +55°C
• Metal enclosure without fan
• Dimensions: 40 x 75 x 45 mm
• CE, FCC, RoHS certified
• Weight: 300 g

- WITEK-0002