Dahua XVR5108H-I2 XVR 5 in 1 Dahua WizSense 8 channels HDCVI /…

Dahua XVR5108H-I2. XVR 5 in 1 Dahua WizSense 8 channels HDCVI / HDTVI / AHD / CVBS + 4 channels IP 6MP (added to the BNC inputs). BNC inputs can be converted to IP. AI / H.265 + / H.265 / H.264 + / H.264 format. Two-way audio. 1 audio input / 1 output. Plays 8 channels. 64 Mbps. Recording 5M-N (10 ips), 4M-N, 1080P (15 ips), 1080N, 720P, 960H, D1, CIF (25 ips). HDMI output (1080P), VGA output (1080P). 2-channel perimeter protection. 2-channel facial recognition. 8-channel SMD Plus. Supports 1 SATA HDD up to 10TB. RJ45 Fast Ethernet. Onvif, CGI, P2P, DDNS. 2 USB, 1 RS485. 12V DC. Desktop. Xvr5108h-i2.

Specs

    5 technologies: IP cameras, HDCVI, HDTVI, AHD and analog CVBS with automatic signal recognition

    8 BNC channels up to 5MP (BNC inputs can be converted to IP)

    4 6MP IP channels (added to BNC inputs)

    Video compression: AI, H.265 +, H.265, H.264 +, H.264

    HDMI video output (1080P) and VGA output (1080P)

    Output division: 1, 4, 8, 9 (IP mode off); 1, 4, 8, 9, 16 (IP mode enabled)

    1 RCA input / 1 RCA audio output

    Two-way audio via RCA input / output

    Audio compression: G.711a, G.711u, PCM

    Recording resolution: 5M-N, 4M-N, 1080P, 1080N, 720P, 960H, D1, CIF

    64 Mbps maximum incoming bandwidth

    Main stream: 5M-N (1 ~ 10 ips), 4M-N / 1080P (1 ~ 15 ips), 1080N / 720P / 960H / D1 / CIF (1 ~ 25 ips)

    Secondary stream: D1 / CIF (1 ~ 25 ips)

    Manual, Schedule, Video Detect, Video Loss, Tamper, Alarm, Stop recording modes

    Intervals for recording (1 ~ 60 minutes), pre-recording (1 ~ 30 sec.) And post-recording (10 ~ 300 sec.)

    Independent configurable video sensor per camera (selectable 22x18 grid), video loss detection and masking, diagnostics

    Playback of up to 8 channels (4 channels with AI mode on)

    Perimeter protection: 2 channels, 10 IVS for each channel

    Face recognition: 2 channels, only supports analog cameras

    SMD Plus: 8 channels, people / vehicle classification

    Internal capacity for 1 SATA HDD up to 10TB (sold separately)

    Multilanguage on-screen menu with new improved graphical interface

    Possibility of updating the firmware of DAHUA cameras from the recorder itself

    Software and hardware watchdog

    Watermark to preserve the integrity of the videos

    RJ45 Fast Ethernet network port (100MB)

    Network protocols: HTTP, HTTPS, TCP / IP, IPv4 / IPv6, Wi-Fi, 3G / 4G, SNMP, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Server Alarm, P2P, IP Search (supports Dahua IP cameras, DVR, NVS, etc.)

    ONVIF 16.12 and CGI compliant

    Remote access from web browser and iPhone, iPad, Android devices (EVO and TTS App)

    Sending emails with attached photograph in alarm

    Send to FTP scheduled or in alarm

    Possibility of sending alarm and being connected to alarm receiver software (C.R.A.) using free AlarmSpace software

    Possibility of fixed or dynamic IP through DDNS Evolution service

    Communication ports: 2 USB 2.0 ports, 1 RS485 port (for PTZ control)

    Power supply: 12V DC, 2A (<7W, not counting discs)

    Storage temperature -20 ° C ~ + 70 ° C

    -10 ° C ~ + 55 ° C operating temperature

    Relative humidity 0% ~ 90%

    Dimensions: 325 (W) 55 (H) x 257 mm

    Weight: 1.2 kg

- DAHUA-2963-FO