Fibaro FGS-214. Smart Module Smart Module FIBARO remote control. Designed to turn a device or circuit on and off. It allows controlling the devices through the Z-Wave network or with buttons connected directly to them. It works with various types of switches and buttons. Compatible with all VESTA panels (Z-Wave). Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption. Works as a Z-Wave repeater (all non-battery powered devices will act as repeaters to increase network reliability) Fgs-214 eu fibaro smart module 868,4 zwave+ (relay single).

Specifications

Radio protocol: Z-Wave (500 series chips)

Radio frequency: 868 ~ 868.6MHz, 869.7 ~ 870MHz

Radio signal strength: +5 dBm

Distance: up to 50 meters outdoors, up to 40 meters indoors (depending on building materials)

Compatible with all VESTA panels (Z-Wave)

Active element: micro-gap μ relay

Maximum cable length: 3 meters

Recommended wire cross-sectional area: 0.2 ~ 2mm2 (24–14 AWG) (depending on load current)

Power supply: 100V ~ 240V AC, 50 / 60Hz / 24V ~ 30V DC

Rated load current: 6.5A

Supported Charge Types: Resistive and Incandescent

Operating temperature: 0 ° C ~ + 35 ° C

Relative humidity: 0% ~ 95% (non-condensing)

Installation and use classification: Automatic electrical control for use in household equipment or similar

Dimensions: 42.5 (W) x 38.25 (H) x 20.3mm

- FIBARO-005