To install a panel, it is necessary to first place a flush-mount box on the wall or wall where we will later fix the panel. Available for all series, they are made of aluminum and zamak.

They have hinges that can be folded in any direction, as shown in the image, which allow the plate to be held while the wiring is being carried out, facilitating the installer's work.

They have circular marks cut into the bottom of the box, which are pierced with a garter belt, blow or pressure, thus allowing the passage of the cables.

In the event that several plates are combined, always from the same series, it is necessary to use spacers for a perfect coupling between them as shown in the figure. One set is required for each additional plate that is installed between the wallboxes.

TECHNICAL SPECIFICATIONS

SERIES 8

Measurements: 115x375x 45 mm (horizontal-vertical-depth).