Distribution tap of 4 dB + C.C T (plant 1). Ref. 5229 of Televes.
These sockets are used in signal distribution up to 2400 MHz. With the four available values, a cascade can be formed with well-equalized signal values. This shot is used at the end of the cascade, with a loss of 4 dB for UHF and 5 dB for FI. With step current for FI. Distribution pass-through 4 dB + C.C. T (floor 1) 5-2150 MHZ + DC

The sockets and junction boxes incorporate a new flange model whose main advantage is to facilitate the visualization of the connection in locations where the outlet is close to the ground.

The tightening design of the live has been improved to meet the specifications of cable operators. With this improvement, the pressure system would meet the following specifications:

For a minicable of 4.4 mm in total diameter, the supported weight would be:

• greater than 4 Kg with live fastening and mesh.
• greater than 2 Kg with clamping only live.

For a cable type T100, the supported weight would be:

• greater than 12 Kg with live fastening and mesh.
• greater than 5 kg with fastening only live.

The shielding indication is entered in the chassis.