EBS EPX400-A30C EBS communicator for alarm systems

EBS EPX400-A30C. EBS communicator for alarm systems. Via 4G/2G radio and Ethernet. Compatible with Contact ID and SIA. Up to 9 inputs and 3 outputs. Simulates PSTN line. AES security. SIM card support. Remote upgrade. Optional box 4g and ethernet communicator for alarm transmissions.

• Event transmission via 4G/2G radio or Ethernet
• Supports Contact ID and SIA protocols
• Telephone line simulation (PSTN)
• Up to 9 programmable inputs (NO, NC, EOL, DEOL)
• 2 open collector outputs (100 mA max.)
• 1 relay output (1A/30VDC or 0.5A/125VAC)
• RS232 serial interface (up to 115200 bps)
• 10/100 Mbps Ethernet port with automatic cable type detection
• Mini SIM card support
• Transmission channels: LTE, EDGE, GPRS, SMS, Ethernet
• LTE CAT 1bis modem with up to 10.2 Mbps downstream and 5.2 Mbps upstream
• Supported frequencies: GSM 850/900/1800/1900 MHz, LTE bands 1, 2, 3, 4, 5, 5, 7, 8, 20, 28, 38, 40, 66
• History of up to 5000 events
• 4 status LEDs (signal level, device status, communication)
• Local configuration via PC software and programmer, or remote via mobile or Ethernet network
• Remote firmware upgrade
• Remote access to control panel
• Transmission security via AES encryption
• Compatible with VRLA 12V-7Ah backup batteries (not included)
• Charging module with reverse, short circuit, mains failure and low battery protection
• Max. charging current: 220 mA
• Low battery threshold: 11 VDC
• Main power supply: 18 VAC (16-20 VAC) / Alternate: 13.8 VDC (12-14 VDC)
• Consumption: 130-250 mA depending on source and load
• Operating temperature: -10 °C to +55 °C (-10 °C to +55 °C)
• Operating humidity: 5 %-93 % non-condensing
• PCB dimensions: 163 × 73 mm
• Weight: 120 g
• Certifications: CE

- EBS-12