Optex TXI-ST OPTEX TXI wired PIR curtain detector for outdoor…

Optex TXI-ST. OPTEX TXI wired PIR curtain detector for outdoor use. Range 12 m x 2.4 m and installation from 2.2 to 4 m. Triple AND logic and SMDA digital compensation. Selectable lower zone, distance adjustment in 3 levels. IP55 protection. Power supply 9.5~16 V DC Optex txi series pir curtain detector with 12 m range for outdoor use.

Technical features

• Outdoor curtain detector for height mounting
• Wired TXI series model
• Detection method: passive infrared PIR
• Detection area of 12 m x 2.4 m (40 ft x 8 ft)
• Mounting height from 2.2 to 4.0 m (8 to 15 ft)
• 60.0 ± 0.5 s warm-up period
• Alarm period 2.0 ± 0.5 s
• Red LED selectable ON/OFF
• EOL terminals for faster and easier wiring

Functionalities

• Triple AND logic with area-optimized design
• Design to reduce false alarms caused by small animals and ambient light
• Detection distance adjustable in 3 levels via included plates
• Bottom zone selectable ON/OFF via bottom lever
• Horizontal adjustment: left, front or right
• SMDA digital temperature compensation

Alarms

• Designed to detect intruders and activate an alarm control panel
• Warm-up indication: blinking for 60 s
• Alarm indication: on for 2 s
• End of step test mode indication: fast flashing for 5 s
• Alarm output NC 24 V DC 0.1 A max. with resistive load
• Tamper output NC 24 V DC 0.1 A max. with resistive load
• Tamper open when cover or main unit is removed

Power supply

• Power supply 9.5 to 16 V DC
• 8 mA consumption in normal operation
• 16 mA max. consumption at 12 V DC

Environmental

• IP55 protection
• Operating temperature from -30°C to +60°C (-30°F to +60°F)
• Maximum ambient humidity 95%.
• RF interference: no alarm at 10 V/m

Physical Characteristics

• Dimensions: 119.5 x 52.0 x 54.5 mm
• Approximate weight 122 g
• Wall mount with side and rear brackets included
• Wall or ceiling mount with optional bracket TXI-BKT
• Compatible with concealed and exposed wiring via included bracket

Contents

• 2 mounting screws
• 2 connecting screws
• 1 side bracket
• 1 rear bracket
• 1 area adjustment plate 1
• 1 area adjustment plate 2
• 2 sponges

- OPTEX-253