Individual protector for computer networks with category 6 cables.

ATLAN 1000 BASE-T CAT6 is a protector with RJ45 crimped input  cable and RJ45 output connector, able to withstand current up to 2 kA for each line with a transfer speed of 250 MHz. It is especially designed to individually protect every piece of equipment connected to a 1000 BASE-T computer network with category 6 wiring which transmits a large amount of data (workstations, graphic stations, servers etc.) Includes 50 cm category 6 cable already crimped. ATLAN CAT6 have been tested in official and independent laboratories, obtaining their characteristics according to relevant standards (shown in the table).

Installation

Protection should be installed as close as possible to the equipment. A cable with RJ45 connector has 8 wires. ATLAN protects 4 pairs (8 wires) in series. If there are two pieces of equipment located in separate buildings but linked together, the protection must be installed on both sides of the line. The recommended procedure for installation is the following:

1. Insert the protector between the cable with RJ45 connector and the equipment to be protected.
2. Bond the protector to the ground using the 'faston' type connector provided.

Specifications