Pre-terminated Ethernet network cable 0.3m long, with an RJ45 connector at each end. Made with a Cat 6 data cable and type U/UTP, with an internal copper conductor and LSFH (Low Smoke Free of Halogen) sheath in violet.

Supplied in individual bag.

Stands out for

• Category 6
• U/UTP type data cable
• Solid copper center conductor (23AWG)
• Compatible with PoE/PoE+ (Power over Ethernet) technology, allowing network devices to be powered through the cable itself

Main features

• Insulation of the copper conductor in PE (Polyethylene) of 0.95mm diameter
• LSFH (Low Smoke Free Of Halogen) outer sheath with 0.45mm thickness and 6.2mm diameter
• 72% rated speed
• RJ45 connectors with gold-plated "pin" terminations

Discover

The Cat 6 type cable complies with the Gigabit Ethernet cable standard and is backward compatible with lower category standards (Cat 5/5e and Cat 3). Category 6 evolves over category 5E, allowing transmission frequencies of up to 250 MHz (in each pair) and a transfer speed of up to 1Gbps. It also has features and specifications to avoid crosstalk (or crosstalk). This type of data cable is used for 10Base-T, 100Base-T and 1000Base-T (Gigabit Ethernet) installations.

They are characterized by:

• TIA/EIA-568B.2-1 compliant
• Crucifix type padding
• Transfer speed up to 1Gbps
• Bandwidth up to 250 MHz
• It has a tear thread for easy opening.
• 100 ohm impedance
• Maximum resistance per conductor, less than 117 ohms/Km

specs