Wireless Managed Access Point WaveData

1xGbE WAN PoE + 1GbE LAN + 1xUSB 3.0

Your trusted Wi-Fi option for the busiest environments

Managed dual band Wi-Fi Access Point that provides a high-performance wireless mobility solution for deployments with medium/high density.

WaveData provides 1 Gigabit Ethernet RJ-45 WAN (PoE) port, 1 Ethernet RJ-45 LAN port, 1 USB 3.0 port and Wi-Fi (WLAN 802.11 b/g/n/ac, 2.4 and 5GHz) in addition to Kensington Security Slot.

It is equipped with the MyNET WiFi technology from Televes, which enables its configuration in low-power mode (Low Power) and provides the most efficient, secure and responsible Internet access possible.

Highlights

• 802.11ac Wave 2 managed access point
• Maximum aggregated throughput of 1.73Gbps
• MU-MIMO: Multi-User MIMO as defined in the 802.11ac standard that allows simultaneous multiple transmissions from the Access Points (AP) to up to four clients
• 4 dual band built-in antennas with high performance (4dBi) and beamforming
• Compatible with PoE 802.3af/at
• Up to 80MHz channel bandwidth
• Available remote management and monitoring of the entire WaveData network via the WaveBox (Ref. 769030)
• Maximum performance above 1Gb/s
• Operation in the 5 GHz band
• MyNETWiFi technology: Low-power mode configuration providing an Internet access with the following characteristics:

1. Efficient: improves performance of the connected users thanks to the creation of access microcells

2. Secure: reduces the reach range to avoid undesired network access by third parties

3. Responsible: reduces the degree of exposure to electromagnetic waves

Features

• 2.4GHz IEEE 802.11/b/g/n with 2 Streams MU-MIMO (2x2)
• 5GHz IEEE 802.11/n/ac Wave2 with 2 Streams MU-MIMO (2x2)
• Up to 16 SSIDs and 124 stations per SSID
• Support simultaneous dual band (2.4 GHz and 5 GHz) with band steering
• It implements fast roaming (IEEE 802.11r) between access points
• Centralized management & monitoring – incorporating a SNMP agent
• Wi-Fi schedule. Wi-Fi On/Off scheduling
• Band steering. In 2.4GHz/5GHz dual devices the AP routes to the most appropriate band to the device according to the current load
• Automatic channel selection according to the spectrum conditions (for 2.4GHz and 5GHz)

Specifications