TP-LINK TL-WA801ND wireless access point 300 Mbit/s White Power over Ethernet (PoE)

What This Product Does
The TP-LINK Wireless N Access Point TL-WA801ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The APs support a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.

Wireless N - Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!

Multiple Operating Modes
- Easy to Build WLAN
Supports multiple operation modes (Access Point, Multi-SSID, Client, Universal/ WDS Repeater, Bridge with AP) to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Multiple operating mode also helps you easily to build wireless network for hard-to-wire locations or eliminating wireless dead zone.

Passive PoE Supported
- More Flexible Deployment
The TL-WA801ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

TP-LINK TL-WA801ND. Maximum data transfer rate: 300 Mbit/s, Ethernet LAN data rates: 10,100 Mbit/s, Frequency band: 2.4 - 2.4835 GHz. Security algorithms: 64-bit WEP,128-bit WEP,152-bit WEP,SSID,WPA,WPA-PSK,WPA2,WPA2-PSK,WPS. Management protocols: SNMP. AC input voltage: 9 V, Input current: 0.6 A. Placement: Table, Wall, Product colour: White, Certification: CE, FCC, RoHS

Features
2.4 GHz	Y
5 GHz	N
Maximum data transfer rate	300 Mbit/s
Ethernet LAN data rates	10,100 Mbit/s
Frequency band	2.4 - 2.4835 GHz
Networking standards	IEEE 802.11b,IEEE 802.11g,IEEE 802.11n
Cabling technology	10/100Base-T(X)
Modulation	16-QAM,64-QAM,CCK,DBPSK,DQPSK,OFDM
Quality of Service (QoS) support	Y
Receiver sensitivity	270M: -68dBm@10% PER 130M: -68dBm@10% PER 108M: -68dBm@10% PER 54M: -68dBm@10% PER 11M: -85dBm@8% PER 6M: -88dBm@10% PER 1M: -90dBm@8% PER
Security
Security algorithms	64-bit WEP,128-bit WEP,152-bit WEP,SSID,WPA,WPA-PSK,WPA2,WPA2-PSK,WPS
MAC address filtering	Y
Protocols
Management protocols	SNMP
Ports & interfaces
Ethernet LAN (RJ-45) ports	1
Power
Power over Ethernet (PoE)	Y
AC input voltage	9 V
Input current	0.6 A
Design
Placement	Table, Wall
Product colour	White
Reset button	Y
LED indicators	Y
Certification	CE, FCC, RoHS
Antenna
Antenna type	External
Antenna direction type	Omni-directional
Antenna features	Detachable antenna
Antennas quantity	2
Antenna gain level (max)	5 dBi
Antenna connector type	RP-SMA
Operational conditions
Operating relative humidity (H-H)	10 - 90%
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-40 - 70 °C
Storage relative humidity (H-H)	5 - 90%
Weight & dimensions
Width	181 mm
Depth	125 mm
Height	36 mm
Packaging data
AC adapter included	Y