L3 JetStream ™ Manageable Switch with 52 pure Gigabit ports, 48 RJ45 10/100/1000Mbps ports including 4 Gigabit SFP combo slots, 2 built-in 10G SFP+slots, 2 optional 10G SFP+slots. Abundant L3 routing protocols including Static Routing/RIP/OSPF/ECMP/VRRP, up to 8 physically stacked units, Port-Based VLAN/Labeling/Voice, Q-in-Q (Double-labeled VLAN).
Warning: Last items in stock!
TP-Link’s JetStream T3700 series L3 managed switches are designed to form highly accessible, scalable and robust networks. With an extensive suite of routing protocols, 10Gbps wired speeds, physical stacking technology, diverse management features and an optional redundant external power unit, TP-Link’s JetStream T3700 series provide a reliable, secure and cost-effective solution for enterprise, campus and ISP networks.
T3700 series switches support Layer 3 routing protocols that include Static Routing, RIP, OSPF and VRRP, helping to build scalable, reliable networks. Multicast routing protocols such as PIM-SM and PIM-DM guarantee efficient routing for multicast groups.
The switches are equipped with 2 fixed and 2 optional 10G SFP+ ports which can be used for stacking. T3700G-52TQ supports up to 8 switches for network simplification, and up to 384 GE, 32 Gigabit combo SFP and 32 10G SFP+ ports per physical stack, providing up to 1408Gbps total switching capacity for the network. With all units identified by a simple IP address, the stack can be easily configured and monitored.
T3700 series switches provide 3 kinds of out-of-band management ports: RJ45 console ports, Micro-USB console ports and RJ45 out-of-band management ports. Micro-USB console ports are designed for those laptop computers which do not support the RS232 (DB9) interface. Customers can use a USB cable to manage switches through the CLI (command-line interface). The RJ45 out-of-band management port is used solely for web management, leaving the RJ45 ports free for data transmission.
|Standards and Protocols||IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ae, IEEE 802.3ad, IEEE 802.3az, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p|
|Interface||48 10/100/1000Mbps RJ45 Ports |
(Auto Negotiation/Auto MDI/MDIX)
4 Combo Gigabit SFP Slots
Up to 4 10G SFP+ Slots (2 fixed and 2 optional)
1 Micro-USB, 1 RJ45 Console Port
1 Management Port
1 USB Slot
|Network Media||10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)|
100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m)
100BASE-FX: MMF, SMF
1000BASE-X: MMF, SMF
|Fan Quantity||2 Removable|
|Power Supply||100~240VAC, 50/60Hz|
Dual Hot-swappable power supply module: PSM150 (Maximum Output Power: 150W)
|Dimensions ( W x D x H )||17.32*16.55*1.73 in. (440*420*44 mm)|
|Max Power Consumption||58.82W (220V/50Hz)|
|Max Heat Dissipation||200.69 BTU/h|
|Installable SFP+ Transceivers and Direct Attach Copper (DAC) Cables||TXM431-SR|
|Max Number of Stacking Ports Installable||2 SFP+|
|No. of Units Per Stack||8|
|Stacking Speed (Per Port)||20 Gbps (Full-Duplex)|
|Switching Capacity||Up to 176Gbps for a standalone switch|
|Packet Forwarding Rate||Up to 130.9Mpps for a standalone switch|
|MAC Address Table||32K|
|Packet Buffer Memory||4MB|
|Number of Routes||8K IPv4|
|Number of Static Routes||256 IPv4|
|Number of IP Interfaces||128 IPv4|
|Quality of Service||Support 802.1p CoS/DSCP priority|
Support 8 priority queues
Queue scheduling: SP, WRR, SP+WRR
Port/Flow- based Rate Limiting
|L2 Features||IGMP Snooping V1/V2/V3|
802.3ad LACP (Up to 64 aggregation groups, 8 ports per group)
Spanning Tree STP/RSTP/MSTP
Loop back detection
802.3x Flow Control
|VLAN||Supports up to 4K VLANs simultaneously |
IEEE 802.1Q VLAN/MAC VLAN/Protocol VLAN/QinQ/Private VLAN/GVRP
Radius/Tacacs+ Authentication and Accounting
Dynamic ARP inspection (DAI)
IP Source Guard
Access Control list
Broadcast/Multicast/Unknown-unicast Storm Control
|L3 Features||Wire-speed IP forwarding|
RIP v1, v2
|Management||Web-based GUI and CLI management|
SNMP v1/v2c/v3,compatible with public MIBs and TP-LINK private MIBs
RMON (1, 2, 3, 9 groups)
DHCP/BOOTP Client, DHCP Snooping, DHCP Option82
Time Setting: SNTP
Firmware Upgrade: TFTP & Web
SYSLOG & Public MIBS
|Certification||CE, FCC, RoHS|
|Package Contents||Switch; Power Cord; Quick Installation Guide; Resource CD; Rackmount Kit; Rubber Feet|
|System Requirements||Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8, MAC® OS, NetWare®, UNIX® or Linux.|
|Environment||Operating Temperature: 0℃~40℃ (32℉~104℉)|
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
No customer reviews for the moment.
TL-WA854RE TP-LINK is designed to comfortably expand the coverage and improve the signal strength of an existing wireless network to eliminate "dead zones". With wireless speeds to 300Mbps N, Range Extender button and miniature size design for wall mounting, expand a wireless network has never been so easy.
The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone,...
The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector.