Vonets

Latest comments

Vonets VAP11G-500 Bridge WIfi Bridge + High-speed and high-range repeater View larger

  • 2-year warranty.
  • You have 14 days to return it.
  • 100% safe purchase.
  • Shipment insured all risk.

Vonets VAP11G-500 Bridge WIfi Bridge + High-speed and high-range repeater

vonets-vap11g-500

This bridge (Bridge) of high range and speed allows to have a Wi-Fi connection in receivers or any equipment that only has an RJ45 port ideal for Dreambox, Openbox, Ariva, Xbox, etc ... very simple configuration in just 2 minutes, you need 5V power that is obtained from the USB port.

More details

59,99tax incl.

Vonets

More info

The WiFi bridge VAP11G-500 allows a high-speed WiFi connection in devices that only have an RJ45 network port. Its configuration is very simple, only 2 minutes. It needs power between 5V and 15V that can be obtained from the USB port or external feeder.

Vonets VAP11G-500 is a 300Mbps professional wifi bridge of reduced size that also performs the function of WiFi repeater. The new design unique in the world ensures lasting stability. It is based on the IEEE 802.11n, IEEE 802.11b and IEEE 802.11g standards.

Features

  • Wifi bridge with Repeater function.
  • Intelligent WiFi bridge mode that automatically scans WiFi networks and with Wi-Fi hotspot memory function ..
  • Respectful with the environment, Safe, Portable, Mini.
  • Compatible with all types of WiFi networks.
  • Compatible with the IEEE 802.11 B / G / N standard up to 300 Mbps at 2.4 Ghz.
  • The best option for Receivers, Android, IPTV, Sky Box, X-BOX, IP camera, Mediacenters ...
  • Supports Security WPA-PSK / WPA2-PSK, 64/128 / WEP.
  • Supports SSID identifier transmission.
  • Connection support for more than 20 devices at the same time.
  • Reception of signal at 500 meters without obstacles.
  • Three parallel DC connections, one for power socket.
  • It can be powered by USB.
  • Very small dimensions: 1.5cm x 4.5cm x 9cm.
  • CE Certificate
  • Compatible with VoIP phones and ATAs.
  • Compatible with IP cameras.
  • It supports firmware updates through the WEB interface.

There are 2 ways to power the VAP11G-500, connecting it directly to a USB port or using a DC power adapter that should not be more than 15V. In this way we can feed the device itself, IP camera, receiver, etc ...

Afterwards, we only have to install the software on a PC or Laptop to configure it and finally connect the RJ45 cable of the VAP11G-500 to the device.

VAP11G-500 in WiFi repeater mode will allow you to extend your existing WiFi signal stably. The way of working is the following: when connecting it to any equipment with RJ45 it will connect to the Router (Hotspot) and at the same time repeat its Wi-Fi signal, increasing the coverage of it, all this quickly and easily, from your own browser Web.

VAP11G-500 provides three types of power, forget to carry a lot of power adapters, has all kinds of connectors included as standard, so you can easily power it, for example if you have an IP camera you can connect the power supply to the VAP11N and this connect to the camera, so that with a single source would feed both computers.

As for the configuration software, a simple and easy-to-use design has been chosen, without having to access an IP address to access the configuration, since it uses configuration techniques of virtual configuration domains (IPMP).

Specifications



Hardware
Frequency2.4Ghz
ProtocolsIEEE 802.11 B/G/N
Transmission speed300Mbps
Connections1x current Continuous
2 in 1 cable for power and Ethernet 10/100
ButtonsRestart (Press for 5 seconds)
Status LEDEthernet status
WiFi status
Antenna2x internal omnidirectional
Input voltageDC 5V;
ConsumptionLess than 1.5W
TamSizeaño90mm x 45mm x 15mm
CertificatesFCC/CE
Wireless
Basic functionsWiFi Hotspot
Channels: 1-14
Automatic scanning of WiFi Hotspots
WiFi Hotspot Memory
Normal or high power mode.
Operating modesIntelligent bridge mode.
WiFi signal repeater mode.
SecurityWEP(64,128), WPA, WPA-PSK, WPA2, WPA2-PSK.
System functionsReset Device
Factory reset
Manage account and password
Firmware update

Reviews Vonets VAP11G-500 Bridge WIfi Bridge + High-speed and high-range repeater

No customer reviews for the moment.

Write a review

Vonets VAP11G-500 Bridge WIfi Bridge + High-speed and high-range repeater

Vonets VAP11G-500 Bridge WIfi Bridge + High-speed and high-range repeater

This bridge (Bridge) of high range and speed allows to have a Wi-Fi connection in receivers or any equipment that only has an RJ45 port ideal for Dreambox, Openbox, Ariva, Xbox, etc ... very simple configuration in just 2 minutes, you need 5V power that is obtained from the USB port.

Featured products