NanoKom domestic amplifier 1 output VHF/UHF - LTE Ready 26dB Televes
search
  • NanoKom domestic amplifier 1 output VHF/UHF - LTE Ready 26dB Televes

NanoKom domestic amplifier 1 output VHF/UHF - LTE Ready 26dB Televes

Domestic amplifier with 1 output and automatic level adjustment to extend the terrestrial television domestic network. 
Equipped with selectable LTE/4G and input power supply for pre-amplifier or BOSS system feeding. Provided with an external power supply (ref. 579901). Televes 562701

star star star star star
Reference televes-562701
Brand Televes
Quantity

Free shipping

Domestic amplifier with 1 output and automatic level adjustment to extend the terrestrial television domestic network. 
Equipped with selectable LTE/4G and input power supply for pre-amplifier or BOSS system feeding. 
Provided with an external power supply (ref. 579901).

Highlights

  • Equipped with USOS (User Selectable Output Signal) technology: the installer selects the desired output level, which remains stable. The device automatically adjustsgain according to the input signal variation.
  • Pleasant, low visual impact design with trim
  • Ultra-small dimensions (64 mm x 45 mm x 28 mm)
  • EasyF connection system
  • Remote power feeding: the amplifier can be powered either by a local power supply or through the output
  • Fully automated manufacturing, subject to the most stringent quality controls

Features

  • Channel 60/69 switch for LTE filtering
  • ON/OFF DC pass switch, for pre-amplifier or BOSS system powering
  • Easy mounting, preserving the bending radius of the coaxial cables
  • Can be wall-mounted using screws

Discover

EasyF connection system: simplicity and savings

EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.

  • Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
  • Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
  • Cost savings: no additional connectors are required (neither F nor IEC)
  • Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
  • Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:

1. Unscrew the device's cover to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to ensure connection

Learn more about EasyF system reliability

With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering. 

  • Always as new: the device's operating life increases when the factor of solder wearing out with time is removed
  • Failure rate reduction: usually produced as a result of cold soldering joints
  • Electromagnetic behaviour optimization: for high frequencies
  • Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced

Specifications

Reference  562701
Nº of outputs 1
Frequency band UHF VHF BI FM
Bandwidth MHz 470-862
470-790*
174-400 47-68 87-108
Gain dB 26 13 12 -20
Output level DIN45004B dBµV 106 98 98 -
Automatic gain range dB 0-20 -
Vout regulation range dB 0-12 -
Self-regulated output level (10 DTT channels) dBµV 96 - - -
Noise factor dB 4.5 5.5 7
Input power supply (1) Vdc 0/12
Maximum input current mA 50
AC/DC converter sector Vac 196-264 (only ref 562701)
departure Vdc 12 (only ref 562701)
Total AC consumption W 0.93
Protection index IP 20
Dimensions (A x H x D) mm 64 x 45 x 28

1 - Configurable by input, through a switch
*: LTE ON / **: the TV output is attenuated by 9 dB.

Summary

0

star_border star_border star_border star_border star_border

0 Reviews

Only users who already bought the product can add review.

Write your review

monetization_on Write your review and get voucher for discount 3%
*valid for 60 days

No customer reviews for the moment.