High quality Cabelcon Quickmount compression connector for coaxial mini HEC CommScope and similar mini coaxial cables.

The pin integrated in the plug ensures the best contact in the F sockets even with a small diameter of the cable's inner conductor. Indoor use (not waterproof).

Technical specifications

• Certificates: class A, EN 50083

• Impedance: 75 ohms
• Installation temperature: -5 ° to + 50 ° C
• Material: NiTin
• Max. tensile strength - short term: 260 N
• Operating temperature: -40 ° to + 100 ° C

Fits cables with the following diameters:

Outer conductor: 3.6 - 4.4 mm
Jacket: 4.9-5.4 mm

• All Cabelcon CX3 RG6 / 59 compression pliers for connectors can be used
• Effortless Simple Installation - No need to put a tube under the braid anymore.
• Place of use: indoor. The plug is not waterproof.
• Safe contact in F sockets thanks to the plug principle:

connector F has its own inner conductor. This is countersunk in the F connector in the state of delivery. When inserting the stripped wire, the F connector pin is pushed out through the inner wire in the correct position; At the same time, the inner conductor of the cable is fixed by contact clips. This ensures reliable contact in an F socket even with internal conductors with a diameter of less than 0.6mm, and it is also easy to see when the wire has been pushed far enough into the socket.

When installing, always note: on QuickMount sockets, the braid must not be rejected. Also, all protective sheeting over the braid should be removed.

Examples of suitable cable types:

• Kathrein LCD 89
• Belden H121
• Coaxial Draka 11 AD 08
• WISI MK 76A