SUMMIT SCT 845 SE DVBS2/S2X/C/T2 meter

Combined measuring device with 4.3" TFT LCD display

SUMMIT SCT 845 SE DVBS2/S2X/C/T2 meter

The Summit SCT 845 SE is a combination meter for all types of applications.

It allows measuring DVB-S/S2/S2X signals, as well as DVB-T/T2 (H.265) and DVB-C.

Signal strength and quality (MER) are displayed as numerical values ​​and by means of a bar indicator.

In addition, it determines the signal-to-noise ratio (SNR) and the bit error rate (BER).

It also allows you to check the image quality through the 11 cm high-resolution TFT-LCD screen.

Improvements of the Summit SCT 845 SE compared to the SCT 845:

• Supports DVB-S2X (10 bit)
• Improved high-resolution display
• Faster processor
• Improved software

To quickly point a satellite dish towards the desired satellite, many satellites come pre-programmed.

The device already has a pre-installed channel list for Astra 19.2

Characteristics

• Digital meter for DVB-S/S2/S2X (10 bit), DVB-T/T2 (H.265) and DVB-C
• Loop search for all bands
• Signal strength display, selectable between dBµV, dBm or dBmV
• 4.3" TFT LCD screen
• HDMI 1.4 connection (for external display) - Full-color OSD menu
• A/V outputs: 3.5 mm jack connector (via AV cable), HDMI version 1.4
• Analog video input and 12V power supply test for CCT cameras
• Fast system startup
• Easy to use
• Channel list viewable by zones or complete.
• Fast synchronization
• Measurement of: level, C/N, BER, MER
• Audible synchronization and level signal that can be deactivated
• DiSEqC 1.0, 1.1, 1.2, USALS
• Unicable
• LNB power supply: 13/18 V, 0/22 kHz
• LNB short-circuit protection
• Power supply for terrestrial antennas at 5V, 12V and 24V
• USB 2.0 connection
• Keyboard backlighting (can be turned off)
• Firmware update via USB
• Backing up and restoring channel lists via USB
• Satellite Antenna Angle Calculator
• Flashlight function

Technical data:

• Operating voltage: 7.4 V
• Lithium-ion battery: 2.6 Ah
• Weight: 500 g
• Dimensions (H x W x D): 170 x 120 x 40 mm

Connections

• HDMI: Digital Audio and Video Output, Version 1.4, for TVs with HDMI input.
• USB: 1 USB 2.0 port for connecting a USB storage device (The built-in media player can play different formats from USB storage devices).
• AV IN / AV OUT: AV input and output. (External sources can be played or the received signal can be forwarded to an external device).
• DC OUT (12 V): Output for powering CCTV cameras
• DVB-S/S2 (RF) female type F connector: For connecting the signal source (LNB, multiswitch) using a male type F connector.
• Female connector F T2/T/C (ANT): For connection to terrestrial antennas or to the broadband cable network using an F connector.

Package contents:

Measuring device, instruction manual in German, protective rubber cover, power adapter, 12V connection cable (for powering 12V CCT cameras —not a charging adapter!—), AV cable (3.5mm jack connector to 3 RCA connectors) and 2 F connectors (for screwing into RF/ANT measuring sockets).