Series 450 tower. Intermediate section Zn + RO. 3m Televes 3131
Warning: Last items in stock!
The 450 series offers stretches of different sturdiness to adapt to different heights depending on the wind speed. Recommended from heights of 46.5m, it can reach 81m and even 120m if combined with sections of the 550 series.
The surface plate (item 312901) allows the installation of the tilting base without the need for concrete.
|Description||Middle section, tower|
ML450. RED color.
|Material||(1) Steel ST 37-2, Ø 38 ext. x 2,6 mm thickness|
Re min. 235 N/mm2 - Rn min. 360/510 N/mm2
(2) Steel S 275 JR, Ø 10 mm
Re min. 275 N/mm2 - Rn min. 410/560 N/mm2
|Finishing||Galvanized + bi-chromated + painted with 60-80 μm|
thickness of electrostatic spray powder (RED RAL3020)
|Surface facing the wind||0.473 m2 x 1.2 coef. = 0.568 m2|
|Main steel pipes||mm||38x2.6||40x3|
|Transverse steel rods||mm||10||10|
|Maximum height with 3 m mast||m||81||81|
No customer reviews for the moment.
Floor support Ø60 mm / L = 850 mm for 110-120cm antenna
Fixed column for 240cm antenna Ø 165x5x1500mm with base of 500x500x6mm
Floor support 60 x 2.0 x 850 mm for Gibertini antennas of 125 cm
This Tecatel steel bracket for high resistance floor diameter 100 mm / Length 1000 mm