Esser FX808394 Esser FlexES basic hardware and software…

Esser FX808394. Esser FlexES basic hardware and software equipment. 10 slots for up to 10 analog loops. Up to 127 devices per loop. Up to 32 transponders per loop. Up to 48 IQ8Quad detectors. Up to 32 sirens/detectors with voice/siren and flash. Logging of up to 10,000 events. Certificate 0786-CPD-20903 Esser flexes basic equipment for 10 loops.

Specifications

• Flexible Plug&Play module configuration
• 10 slots for up to 10 analog loops
• Analog loop protected against short-circuit or open circuit
• 2-wire x 0.8~2.5 mm² shielded braided hose loop wiring, up to 3.5 km depending on load
• Up to 127 devices per analog loop configurable in up to 127 zones per loop
• Up to 32 transponders per analog loop
• Maximum load factor per loop, 96 (esserbusPLus): Up to 48 IQ8Quad detectors with siren or flash (Load factor 2), up to 32 sirens/detectors with voice/siren and flash (Load factor 3)
• Emergency mode of each of the loops
• The devices of a loop without communications switch to conventional mode, activating all the zones of the loop in case of alarm.
• 4 configurable outputs
• 9999 zones + 9999 outputs
• Up to 2 optional single loop modules (esserbus/Plus) with galvanic isolation
• Logging of up to 10,000 events
• Emergency power supply: 24V and 150 W/ (6A) power supply with up to 4x12V/24Ah batteries
• Auxiliary power supply output 3 x 24V DC
• Up to 3 cascaded power supplies 450 W (18A) with up to 4x12V/24Ah batteries
• Up to 31 panels in essernet network
• Ports and communications: USB, Ethernet, RS485 and TTY port on CPU
• Parameterization, calibration, programming and diagnostics directly via USB
• Storage temperature -10°C ~ +50°C (-10°C ~ +50°C)
• Operating temperature -5°C ~ +45°C (-5°C ~ +45°C)
• Degree of protection IP30, according to EN 60950
• Housing made of ABS plastic with 10% fiber reinforced, V-0
• Color: gray
• Dimensions: 450 (W) x 960 (H) x 185 mm
• Weight: 17 kg
• Certificate 0786-CPD-20903

- ESSER-58