Extremely strong precise push rod motor with 55cm stroke and a supply voltage of 36V DC. Ideal for solar tracker or for turning large satellite mirrors. The speed is between 1-3mm/sec, depending on the load. The power consumption at maximum load (600kg) is 2.5A. Solid steel gears and a very robust overall construction ensure high load capacity and a long service life. The connection is made via the connecting cable (1m) already mounted on the actuator, or alternatively directly on the internal terminal block of the actuator. A massive clamp ensures a secure hold of the actuator.

The extension and retraction is controlled by changing the polarity. When the endpoints are reached, the actuator stops automatically. The actuator has a built-in potential-free reed sensor with a resolution of 1x pulse/mm. Both limit switches (extension/retraction) can be set as desired and the stroke can thus be adapted to the intended use. The actuator has protection class IP65 (dustproof, complete protection against contact, protection against jet water (nozzle) from any angle)

For dimensions, please refer to the respective product photo.

IMPORTANT Not valid for satellite dishes.

Specifications

• Stroke: 55cm
• Voltage: 36V DC
• Current consumption: 2.5A (at max load)
• Protection class: IP65
• Push maximum dynamic load: 600kg
• Pull maximum dynamic load: 600kg
• Maximum static load: 1500kg
• Speed: 1mm / sec (at maximum load); 3mm / sec (no load)
• Duty cycle: max. 10% (max 2min within 18min at max load. Failure to do so will overheat the engine!)