Visonic WL-IOG General input / output radio transceiver. PowerG.

Visonic WL-IOG. General input / output radio transceiver. PowerG. Wl-iog.

Description

The WL-IOG is a two-way radio transceiver consisting of two general purpose inputs and two general purpose outputs (PGM). Each of the two general purpose inputs can be remotely configured as 'Normally Closed', 'Normally Open', 'End of Line' or 'Double End of Line' input. General purpose outputs are designed to control appliances that have dry contact control inputs.

These general purpose outputs can withstand up to 15VDC (OFF state, open loop) and are capable of dipping down to 1A (ON state, closed loop). The device is protected against manipulation, both the front cover manipulator and the rear manipulator. Operating power is derived from a built-in 3V lithium battery. Battery voltage is monitored and reported when low battery conditions are detected.

Characteristics

• Two-way radio transmitter consisting of two inputs and two outputs or 4 inputs
• Designed to control devices that have control inputs (for example, a garage door)
• Can be configured as NO / NC or dual input
• Can be controlled with the VisonicGO app or with a remote control
• This device requires driver V19.4