Fibaro FGS-213 FIBARO Switch-2 module for remote control of an…

Fibaro FGS-213. FIBARO Switch-2 module for remote control of an electrical device. Designed to be installed in standard wall switch boxes or anywhere else electrical devices need to be controlled. It allows you to control connected devices, either through the Z-Wave Plus network or through a directly connected switch. Equipped with an active power and energy consumption measurement function. Compatible with any Z-Wave or Z-Wave Plus controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Advanced microprocessor control. Active power and energy measurement functionality. It works with various types of switches (momentary, toggle, three-way, etc.). To be installed in wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations Fgs-213 zw5 single switch zw5.

Specifications

Radio protocol: Z-Wave (500 series chip)

Radio signal strength: up to 1mW

Radio frequency: 868.4MHz, 869.8MHz (EU)

Radio signal strength: up to 6 dBm (EIRP)

Distance: up to 50 meters outdoors, up to 30 meters indoors (depending on building materials)

Power supply: 100V ~ 240V AC, 50 / 60Hz

IEC standards: 8A

UL standards (resistive load): 6.5A

UL standards (incandescent load): 5A

Operating temperature: 0 ° C ~ + 35 ° C

Dimensions: 42.5 (W) x 38.25 (H) x 20.3mm

To install in boxes: Ø≥50 mm, depth ≥ 60 mm

- FIBARO-004