LNB Sharp Unicable - LNB-SHSCR
  • LNB Sharp Unicable - LNB-SHSCR

Sharp LNB Unicable - LNB-SHSCR

Unicable LNB for 4 subscribers on one line + 1 x additional legacy output

star star star star star
Tax included
Reference sharp-bs1k1el600a
Brand Sharp

Free shipping

With this new unicable LNB, you can supply four subscribers simultaneously via a coaxial cable plus a fifth subscriber via the second output (legacy output).

Via the additional legacy output, one subscriber can also receive the entire SAT program via a legacy receiver.
With this set-up, all subscribers have all programs and the entire frequency spectrum offered by a satellite available to them.
The LNB can also be used for other satellites, with the exception of Astra.
The LNB provides 4 differently implemented frequency outputs.
Output frequencies SAT-CR: 1210 MHz, 1420 MHz, 1680 MHz, 2040 MHz.
These are pre-programmed in almost all new receivers and just need to be assigned.
Cable lengths up to 40 m can be achieved with a high-quality coaxial cable without amplifier.
To control the LNBs, the connected satellite receiver must support Satellite Channel Routing (SCR/CSS control commands according to EN50494) or the unicable command set.
Special continuity antenna sockets, which pass DC voltage and are decoupled by diodes, are required for further distribution.

  • Technical information
  • General
    • Type
    • Single-cable LNB
    • Design
    • Unicable
    • Assembly
    • For 4 + 1 receiver
    • Output
    • 2
    • Technology
    • Digital
  • Interfaces
    • Connection
    • F type
  • Implementation
    • Feed intake
    • 40 mm
  • Specials
    • DiSEqC
    • Unicable
  • Electrical values
    • Frequency range
    • 950 … 2150 MHz



star_border star_border star_border star_border star_border

0 Reviews

Only users who already bought the product can add review.

Write your review

monetization_on Write your review and get voucher for discount 3%
*valid for 60 days

No customer reviews for the moment.