Triax TMS 17X12T is a 12-way switch for distribution of the 2-position satellite IF signal. The switch can be used individually in efficient systems and at low cost. The unit has a built-in power supply for LNB's. The TMS 17X12T supports DiSEqC
Warning: Last items in stock!
The TMS 17x12T has inputs for 16 polarities (4 complete satellites) and 1 terrestrial input for RTV signal and 12 outputs for end users. The circuit is based on the DiSEqC protocol. The switch box must be powered externally with a TMS Alim Uni. The unit has a built-in power supply for LNB's.
All multiswitches have color codes for the incoming polarities for the convenience of the installation; This is especially effective in combination with our Multi 4 and 5 cable, which have the same colors.
If the wiring of the multiswitch to the board exceeds 60 m, a TAM 17AMP amplifier must be used. If the wiring between the multiswitch and the receiver / decoder exceeds 60 m, a separate line amplifier (line amplifier) must be installed.
|Number of inputs||16 SAT, 1 TER|
|Number of outputs||12|
|Connectors||F connector female|
|Frequency range - SAT||950-2150 MHz (active)|
|Frequency range - Wideband||47-862 MHz (passive)|
|Gain SAT||-2 dB|
|Gain TER||-24 dB|
|Isolation LNB to LNB||35 dB|
|Isolation TER to SAT||20 dB|
|Isolation SAT to TER||30 dB|
|Isolation cross polarisation H/V||28 dB|
|Isolation out - out TER||25 dB|
|Isolation out - out SAT||30 dB|
|Return loss SAT inputs||12dB|
|Return loss SAT outputs||12 dB|
|Return loss TER inputs||8 dB|
|Return loss TER outputs||8 dB|
|Output level SAT (IMD - 35 dB)||100 dBμV|
|Impedance input/output||75 Ohm|
|Switching commands VDC||13 V/18 V - 13 V-22 kHz|
|18-22 kHz, DiSEqC 2.0|
|Supply voltage VDC||15 (± 0.5)|
|LNB current, max.||1.3 A|
|Control LEDs||Green for power|
|Yellow for power link|
|Temperature range||0 - +55 °C|
No customer reviews for the moment.