• Mast mixer 3e/1s "EasyF" VHF-UHF[dc]-UHF Televes

Mast mixer 3e/1s EasyF VHF-UHF[dc]-UHF Televes

3-input combiner for several terrestrial bands. Includes mast-mount case for outdoor installation. Allows current pass from output to UHF input to power a mast amplifier or a BOSS system. Orange colour. Televes 404110

star star star star star
Tax included
Reference televes-404110
Brand Televes
Available in 24/48h

Free shipping

Mast mixer 3e/1s EasyF VHF-UHF[dc]-UHF Televes


Terrestrial signal combiner
3 inputs: BI/FM-BIII/DAB-UHF

3-input combiner for several terrestrial bands. Includes mast-mount case for outdoor installation. Allows current pass from output to UHF input to power a mast amplifier or a BOSS system.


  • EasyF system: easy, quick and safe connectorization
  • High-screening Zamak chassis


  • DC pass
  • Resistant ABS-plastic case for outdoor installation
  • Orange colour

EasyF connection system: simplicity and savings

EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.

  • Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
  • Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
  • Cost savings: no additional connectors are required (neither F nor IEC)
  • Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
  • Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:

1. Unscrew the device's cover to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to ensure connection

Learn more about EasyF system reliability

With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering. 

  • Always as new: the device's operating life increases when the factor of solder wearing out with time is removed
  • Failure rate reduction: usually produced as a result of cold soldering joints
  • Electromagnetic behaviour optimization: for high frequencies
  • Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced


Bands VHF UHF 1 UHF 2
Frequency margin MHz 47 ... 108 174 ... 254 470 ... 790
Attenuation IN BI+FM => OUT dB - - -
> 1.5 > 40 > 40
IN UHF => OUT > 40 5.5 5.5
In-Out return losses dB 10 10 10
Max current through inputs mA - 300 -
Protection Level IP 23
Temperature operat. limits ºC -5 ... +45



star_border star_border star_border star_border star_border

0 Reviews

Only users who already bought the product can add review.

Write your review

monetization_on Write your review and get voucher for discount 3%
*valid for 60 days

No customer reviews for the moment.