Series 450 tower. Lower section pivoted reinforced Zn + RO. 3m Televes 3130
Warning: Last items in stock!
The 450 series offers stretches of different sturdiness to adapt to different heights depending on the wind speed. Recommended from heights of 46.5m, it can reach 81m and even 120m if combined with sections of the 550 series.
The surface plate (item 312901) allows the installation of the tilting base without the need for concrete.
|Description||Reinforced lower section, tower 450. RED color.|
|Material||(1) Steel ST 37-2, Ø 40 ext. x 3 mm thickness|
Re min. 235 N/mm2 - Rn min. 360/510 N/mm2
(2) Steel S 275 JR, Ø 12 mm
Re min. 275 N/mm2 - Rn min. 410/560 N/mm2
(3) Steel F626 (S 235), 12 mm thickness plate
Re min. 235 N/mm2 - Rn. 340 N/mm2
|Finishing||Galvanized + bi-chromated + painted with 60-80|
μm thickness of electrostatic spray powder (RED
|Surface facing the wind||0.495 m2 x 1.2 coef. = 0.594 m2|
|Main steel pipes||mm||38x2.6||40x3|
|Transverse steel rods||mm||10||10|
|Maximum height with mast||m||81||81|
No customer reviews for the moment.
Floor support Ø60 mm / L = 850 mm for 110-120cm antenna
Fixed column for 240cm antenna Ø 165x5x1500mm with base of 500x500x6mm
Fixed column of Ø 50x1,5x750mm (4 rod) with base of 250x250x4mm
Floor support 60 x 2.0 x 850 mm for Gibertini antennas of 125 cm