Fibaro FGS-223. Double Switch 2 FIBARO module. Allows to activate/deactivate devices. Power measurement. Cooperation with different wall switches. Management of sockets. Cooperation with sensors. Z-Wave wireless communication. Complex scenario sequences. Intelligent notifications. Operations via Android and iOS app. Wide range of operations Fgs-223 zw5 double switch.

• FIBARO Double Switch 2 Module
• Designed to turn on and off electrical devices or circuits.
• Allows to control two devices or circuits
• The compact size of the device allows the product to be installed in the housings of other devices
• Devices can be controlled via the Z-Wave network or with buttons connected directly to them
• Works with various types of switches and pushbuttons
• Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption
• Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase network reliability)
• Can be used with all devices certified with Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers
• Radio protocol: Z-Wave (500 series chip)
• Radio frequency: 868MHz
• Radio signal strength: +5 dBm
• Distance: up to 50 meters in open field, up to 40 meters indoors (depending on construction materials)
• Maximum wiring length: 3 meters
• Recommended cable cross-section: 0.2-2.0mm2 (24-14 AWG) (depending on load current)
• Power supply: 100V ~ 240V AC, 50/60Hz
• Rated load current: 6A per channel, 9.5A in total
• Supported load types: resistive or incandescent only
• Operating temperature 0°C ~ +35°C (32°F ~ +35°F)
• Relative humidity 0% ~ 95% (non-condensing)
• Dimensions: 42.5 (W) x 38.25 (H) x 20.3 mm
• Compliance with EU Directives 2011/65/EU; 2015/863; 2014/53/EU

- FIBARO-016