There are no more items in your cart
EOC-300-POE - IP extender coaxial cable | PoE, Passive, Transmitter…
IP PoE passive extender over coaxial cable.
Pair of extension devices with luminous state indicators that allow to transmit an IP channel and also power supply through coaxial cable, to make the installation of a new IP camera possible by reusing the cabling of an already existing analog camera.
Each extender/transceiver has an RJ45 Ethernet connection and a BNC connector for the coaxial cable which is the physical medium for the transmission.
The maximum distance between transceivers is 300M. The transmission rate allowed by the system is 100 Mbps, with the possibility of downloading it to 10 Mbps to reach a distance of 500 meters (accepting a reduction of the power supply transmitted to the camera). Both devices are passive and therefore do not require their own power supply.
Features
- IP extender coaxial cable | PoE
- Passive
- Transmitter and receiver
- Allows transmission 1 IP channel
- Maximum distance 300 m (up to 500 m with DIP switch)
- Bandwidth up to 100 Mbps
Specs
Connection over coaxial | BNC male/female connector |
Power | Not required |
PoE | IEEE802.3, IEEE 802.3u, IEEE 802.3af, 802.3at standard; |
Datarate | 10/100 Mbps with DIP switch |
Distance over coaxial | 300 m between extenders (500 m in case of transmission rate of 10 Mbps) |
Ethernet connection | Port RJ45 |
Ethernet signal | 10/100Mbps Base-T |
Status indicators | Yellow: power OK | Green: data connection OK | Green flashing: Data transmission OK |
Transmitted PoE Power | 15.2 W to 300 meters of coaxial cable, 10.3 W to 500 meters of coaxial cable |
Protection | Overvoltages up to 4 kV second IEC61000-4-5 |
Operating conditions | 0℃~40℃ Temperature | 95% Humidity |
Dimensions | 29 (H) x 45 (W) x 113 (D) mm / 58 g |
Package content
- Pair of transceivers
- Manual
Summary
0
0 Reviews
Only users who already bought the product can add review.
No customer reviews for the moment.