Promax CT-327 Wattmetric and harmonic clamp single-phase and balanced three-phase 600V/2000A AC USB

CAT IV wattmeter clamp with datalogger and graphic screen that allows you to view the voltage and current graphs as well as the harmonics. Includes transient capture, peak-peak measurement and phasor diagram.

0 Review(s)

€849.42 €943.80 Save 10%

Tax included

Reference promax-ct-327

Brand Promax

Promax CT-327 Wattmetric and harmonic clamp single-phase and balanced three-phase 600V/2000A AC USB

€849.42 €943.80 Save 10%

The CT-327 professional clamp meter is one of the most advanced instruments in its class. In addition to its power and energy measurement capabilities (active, apparent and reactive), it can present voltage and current graphs on the screen of the equipment itself, as well as harmonics without resorting to additional equipment.

Insert a microSD card into the memory slot and store measurement records by setting a time between samples between 2 and 7200 seconds. The system accepts cards up to 32 GB (an 8 GB drive is included).

The CT-327 wattmeter incorporates a real-time clock to record the day and time the measurements were taken, transfer them to a PC and process them with any compatible application.

Features

AC TRMS Voltage: Up to 600 V
AC TRMS Current: Up to 2000 A
Power and energy measurement: Active, apparent and reactive
Power factor: 0 to 1
Phase angle: From -180º to 180º
Harmonics: Absolute measure and percentage
Frequency: 45 to 65 Hz
Temperature: From -100 ºC to 1300 ºC
Phasor Diagram: Available
Datalogger: Up to 32 GB of data (in microSD memory)
Dimensions: 106 (W) x 280 (H) x 47 (D) mm
PC Software: Included, to convert data to MS Excel

Specifications

TRMS AC VOLTAGE
scales	From 10 to 600 V / Peak-peak
overload protection	720V RMS

TRMS AC CURRENT
scales	From 10 to 2000 A / Peak-peak
overload protection	2100 A RMS with clamps

POWER FACTOR	from 0 to 1

PHASE ANGLE φ	From -180º to 180 A

POWER	Active, Apparent and Reactive. From 0 to 1.8 MW/Mva/Mvar

ENERGY/h (WH/SH/QH)	Active, Apparent and Reactive. From 0 to 9M

HARMONIC MEASUREMENT	From the 1st to the 50th harmonic of Voltage and Current

TOTAL HARMONIC DISTORTION	From 0 to 100%

FREQUENCY	45 to 65Hz

TEMPERATURE	Scales from -100 to 199.9 ºC and from 200 to 1300 ºC

INDICATION	Dot matrix LCD display (128x64 pixels) backlit

PRESENTATION FUNCTIONS	HOLD (measurement hold), current and voltage waveform, phasor diagram, peak-peak measurement

OVERMARGIN	(OL) or (-OL) appears on the display, and “999” or “9999” appears on the datalogger (ignoring the decimal separator)

data logger	Storage of measurements on microSD card (up to 32 GB) with timestamp and export to Microsoft Excel

Ø MAX CONDUCTOR	57mm

FREQUENCY RESPONSE OF THE CLAMPS	40Hz to 1kHz

FEEDING	2 x 1.5V AA size batteries or 9V AC adapter

PROTECTION CATEGORY	CAT IV (600V)

ACCESSORIES INCLUDED	Test leads, Alligator clips, USB cable, RS-232 cable, Measurement acquisition software, Temperature probe, 8 GB microSD card, Carry bag, AC adapter