Patented stripping device for coaxial cables

• For professional use
• Compatible cables: Mini, Midi, RG58, RG59, RG6
• 2 blades to simultaneously strip the outer conductor and inner conductor in a single operation
• Both blades can be precisely adjusted to different types of cables
• Preset 6.5mm blades

Instructions

The stripper is preset for 6-7mm cable.

For thinner cables, press out the orange cable guide and reinsert accordingly.

Hold the tool in your hand with the adjustment screws pointing down, open the device and run the coaxial cable from the left. Close device.

Now rotate the tool 4-5 times around the wire.

Then open the device, remove the wire and remove any remaining insulation.

If a blade does not cut deep enough (or too deep), it must be adjusted using the Allen wrench attached to the tool:

- Turn the wrench clockwise - The blade cuts deeper into the cable

- Turn counterclockwise - Blade cuts less deeply