There are no more items in your cart
Standard Inno Fiber Optic Inno Fuser IFS-15S
The IFS-15S arc splicer with the new core alignment technology with digital analysis (DACAS) is one of the most reliable on the market. It also has a user-friendly and intuitive user interface with a 4.3-inch high resolution LCD screen that is easy to see and use. It has a compact size.
The IFS-15S arc splicer with the new core alignment technology with digital analysis (DACAS) is one of the most reliable on the market. The IFS-15S has a user-friendly and intuitive user interface with a 4.3-inch high resolution LCD screen that is easy to see and use. With compact size (155mm * 130mm * 137mm), IFS-15S STANDARD Master provides a lot of more comfort for those customers who work in the field of telecommunications. In addition to its compact size, the most important innovation is its compatibility. IFS-15S is compatible with a wide variety of fibers and cables. It combines the functions of fusion and heating for the following common cables in FTTx: fiber of 250μm, fiber of 900μm, flat cable and bridge of fiber.
- Compact size Weight 1.82kg (without battery)
- Splice Method: DACAS (Core alignment system with digital analysis)
- Friendly and intelligent user interface
- Quick menu of optimization
- High precision splicing
- USB port, easy update software
- Universal support
Typically 150 cycles
The IFS-15S provides more than 150 splice cycles. The capacity of the battery is 4200mAH, In addition, the level of battery charge will be displayed by means of 5 levels in the battery indicator
Easy replacement of the electrodes
The electrode does not require the use of a screwdriver. It can simply be changed and replaced by hand. The change procedure is as follows: Open the screw located on the electrode cover. Remove the electrode from the electrode cap (The electrode is attached to the electrode cap).
Easy cleaning mirror
The IFS-15H includes mirror with anti-fog treatment. It is not necessary to clean it. It is not necessary to clean the mirror as another part. Easy maintenance of the mirror gives better results in the connection.
Heating oven with magnifying window
After the fusion is done, the cuff process can be clearly seen. The furnace of the IFS-15H has a window with magnifying glass. Users can observe the cuff through the window.
Bright LED for dark environments.
The LED light is bright enough to work in dark places. Users can see a thin optical fiber when operating in dark environments.
Independent clamp movement
Both clamps are independent to adjust each others. If the clamp needs to be replaced, a part can be changed without having to change both.
4.3 inch screen
The screen of the IFS-15H is protected by glass tempering. The image of the Core Image can be clearly seen with the 4.3-inch LCD screen
|Weight||1.82kg weight (without battery)|
|Applicable Fiber||SM (ITU-TG.652) / MM (ITU-TG.651) / DS (ITU-TG.653) / NZDS (ITU-TG.655) /ITU-TG.657A/ITU-TG.657B|
|Compatible Fiber / Cable||0.25mm / 0.9mm / 2.0mm / 2.4mm / 3.0mm / Flat Cable|
|Type of Fiber||simple kernel|
|Fiber support||Universal / Fixed support type|
|Fiber Diameter||Core: 80-150μm / outdoor coverage 100-1000um|
|Fiber cutting diameter length||Diameter 250μm-1000μm: cleave lengtd 8-16mm|
|Fusion programs||maximum 64 / preconfigured 24|
|Typical loss due to fusion||SM:0,02dB/MM:0,01dB/DS:0,04dB/NZDS:0,04dB/G.657:0,02dB (ITU-T Standard)|
|Loss of return||>>60dB|
|Fusing time||SM Quick Mode 7s|
|Estimated loss value||Yes|
|Fusion attenuation||0.1dB-20dB (steps of 0.1dB)|
|Stove modes / Time||de hornillo: 32 modo/ (típico): 35 segundos|
Heat shrink length
|10mm, 20mm, 30mm, 40mm, 50mm, 60mm|
|Fusion Programs||100 user modes, 10 preconfigured from the factory|
|Internal memory||max 2000 mergers|
|Tension test||1,96~2,25N (standard)|
|Operating conditions||Height 0 ~ 5000m sea level, 95% relative humidity, -10 ~ 50%, Maximum wind 15m/s|
|Storage conditions||-40 ~ 80'C, 0 ~ 95% RH Battery: -20 ~ 30 ° C|
|Size / color||155 * 130 * 137 (L * W * H) / Red Rose|
|It shows||2 cameras and 4.3-inch LCD color screen (with high resolution and surface with anti-shock protection)|
|View of fiber and magnification||tipo X/Y 300X, 180X.|
|Source||18V DC power supply|
|Amount of mergers / Warm up
|157 times typical (Fusion + Oven) / Fusion + Oven = 26.7mA at a time Battery: 4200mAh|
|Electrode||2500 times of fusion|
|Port||USB 2.0 / RS232 (for storage and update)|
|Other mergers||IFS-15S Exclusive Software / Cooling Tray|
Only users who already bought the product can add review.
No customer reviews for the moment.