Fujikura 35S Fiber Optic Fusion Splicer + Fujikura CT16 Fiber Optic Cleaver

Fujikura 35S Fiber Optic Fusion Splicer

The 35S is a liner alignment splicer, setting a new standard in the splicer market. The 35S is equipped with a host of new and improved features, specifically developed to enable faster splicing cycle times with greater accuracy.

FASTER OPERATION

Simultaneous fiber preparation

Fiber preparation, stripping, cutting, and positioning in the splicer generally need to be repeated separately for left and right side fibers. The process in the 35S eliminates this and allows for simultaneous fiber preparation thanks to the new SS05 dual fiber stripper, the new AD16 fiber adapter for the CT16 cutter and the 35S's own smart setting plate mechanism.

USER-FRIENDLY DESIGN

Adjustable LCD monitor

The 35S is equipped with a movable 4.95-inch color LCD monitor to ensure optimal visibility in a wide range of conditions, even when outdoors in direct sunlight.

Easy positioning of the protector

The space between the edges of the left and right fiber clamp is 60mm, as shown in the left image.

This distance allows for easy positioning of the protector, with the splice point placed in the center of the protector.

The scale on the heater shows the guide for other sleeve lengths, for example 40mm.

Removable battery

The removable battery makes replacement easy and accessible.

Smaller size

Removable battery makes replacement The cube shape provides a reduced base area while providing the user with large operating space.

CONSTANT QUALITY

Active Fusion Control

The 35S is equipped with Fujikura's active fusion control technology, which analyzes the fiber image during fusion and controls the arc discharge accordingly. The result is stable splicing loss regardless of the environment.

Control by cut fiber surface

A bad cut on one end is a potential reason for high splice loss. The 35S can address this because it is equipped to control fusion according to the condition of the cut surface. This feature helps reduce splicing loss from poor cuts.

Real-time fusion control

The 35S analyzes the fiber image during fusion and controls the fusion energy according to the real-time condition of the fiber. This helps minimize splicing loss regardless of the environment.

This process also provides Warm Splice Image (WSI) technology. WSI analyzes during splicing and provides a loss estimate, even though the 35S is a liner alignment splicer. It prevents the case of “good loss estimation but bad actual loss”.

Downloads

Data sheet

Fujikura CT16 Fiber Optic Cleaver

Fujikura CT16 Fiber Optic Cleaver includes: FDB-06 Debris Collector, AD-16A Fiber Adapter, HEX-01 Hex Wrench (1.5mm), M-CT16-E Instruction Manual, CC-46 Carrying Case.

Fujikura's CT16 fiber cleaver was designed for FTTH or other space-limited applications where ergonomics and durability are key.

It is compact, can be operated ambidextrously and features a unique fiber adapter, allowing users to cut two bare fibers simultaneously when combined with the dual fiber stripper, the SS-05.

The user can switch the side of the debris collector and fiber adapter based on the preferences of left- or right-handed users, or as environmental limitations dictate.

Additionally, the adjustment wheel located at the bottom of the blade is used to rotate the blade, unlike the previous tedious processes of rotating the blade.

The top lever opens beyond vertical, allowing for easy viewing, cleaning and cutting length adjustment.

The blade retracts when the top lever is opened and the blade activates to score the grain when closed, making it a true one-step blade.

Like its predecessor, this mower can withstand a 30” drop from any of six different orientations and still maintain factory-specified cutting angle performance.

The cleaver blade and fiber holding mechanisms are easy to replace in the field, mitigating the need to send this cleaver for repair.

Downloads

DATA SHEET