The electric MECHANISM is a device that is installed in the door frame to control its opening from a remote location using an electrical device. In an electronic door entry installation, it is possible to activate the building entrance mechanism and allow visitor access from the home's telephone or monitor by pressing the door opener 'key' button. A lock release is made up of an electrical mechanism and an armor or cover depending on whether it is built-in or surface-mounted.

Reversible (DIN Right or DIN Left).

It allows opening both to the right and to the left.

Symmetrical.

It allows you to change hands while maintaining the symmetry of the body.

DIN STANDARD

The DIN STANDARD establishes the opening direction of the door and names the type of lock release installed.

Looking at the door from the side where the hinges are visible:

If the hinges are to the left of the observer, it is a Left DIN lock release.

If the hinges are to the right of the observer, it is a Right DIN lock release.

There are several types of lock release mechanisms, it depends on the TYPE OF OPERATION that is needed.

TYPE N-524_INVERTED AT 24Vdc:

• N-524 (Inverted operation and activation at 24 Vdc): the lock-release unlocks automatically when the 24 Vdc power supply stops.

MAX ADJUSTABLE LATCH:

The lock release includes an adjustable latch, allowing an exact fit between the latch and the striker, with a margin of 3mm. Allows the door leaf not to press the bolt of the lock release.