Surface.

The surface electric lock release is a device that is installed in the door frame to control its opening from a remote location using an electrical device. In an electronic door entry installation, it is possible to activate the door opener at the entrance to the building and allow visitor access from the home telephone or monitor by pressing the door opener "key" button. A surface lock release is made up of an electrical mechanism and a cover.

6000 SERIES

SURFACE WITH LOCK ENTRY Surface lock release with concealed fixing, REVERSIBLE, for doors with locks equipped with a bolt. Does not allow inverted operation or MAX version.

Reversible (DIN Right or DIN Left).

It allows opening both to the right and to the left.

Symmetrical.

It allows you to change hands while maintaining the symmetry of the body.

DIN STANDARD

The DIN STANDARD establishes the opening direction of the door and names the type of lock release installed.

Looking at the door from the side where the hinges are visible:

If the hinges are to the left of the observer, it is a Left DIN lock release.

If the hinges are to the right of the observer, it is a Right DIN lock release.

There are several types of lock release mechanisms, it depends on the TYPE OF OPERATION that is needed.

TYPE N-412_NORMAL 12Vdc:

• N-412 (Normal Operation and activation at 12 Vdc): the lock release unlocks during the time that a 12 Vdc voltage is applied to it.

Technical specifications

Consumption:

N, A 12Vac: 980mA

N-412 12Vdc: 180mA.

Dimensions:

132(V)mmx51.4(H)mmx62(D)mm