To install a plate, it is necessary to place a box on the wall or wall where we will later fix the plate.

The embedding boxes are made of aluminum and zamak. They have folding hinges in any direction, which allow the panel to be held while the wiring is being carried out. They have some circular marks cut into the bottom of the box, which are pierced with a light blow or pressure, thus allowing the passage of the cables.

In the event that several plates are combined, always from the same series, it is necessary to use a set of spacers for a perfect coupling. One kit is required for each additional plate that is installed between the wallboxes.

Available in all series. Select the box of the necessary series, according to the case.