Installed at the entrances to the building, they allow communication with the dwellings, door opening, concierge calls, etc.

CityLine plate.

Cityline is the line of "continuous profile" entrance panels for buildings.

This model of plate is more robust and of higher aesthetic and functional quality. The design integrates, in its video intercom version, the audio and video functions in the same module.

It is characterized by its curved-convex profile, maintaining the same characteristics of its predecessor, the City Classic. There is full compatibility between both models, ensuring their immediate replacement and replacement.

It is made of anodized aluminum, highly resistant to the elements and climatic changes (IP43 IK07). It incorporates new materials such as chrome-plated zamak on the heads and buttons.

The front of the amplifier is made of aluminum and the interior is protected by a stainless steel grill.

It incorporates a WIDE ANGLE COLOR camera with integrated lighting and a regulation system for the camera focus. Adjusting the camera image can be done in different ways:

Through the voice-assisted configuration that includes the amplifier module itself.

Temporarily connecting a keyboard (ref. 7439).

Through the locally connected DUOX Programmer.

Cityline plates do not include the embedding box or surface. This must be requested separately.

It is possible to combine two or more plates, as long as they are from the same series. To fit them perfectly, a set of spacers must be used for every two plates that are installed between their embedding boxes.

Aluminum colour.

Call pushbuttons in injected zamak with a chrome finish, in line with the curved profile of the panel. Outdoor waterproof.

Equipped with special gold-plated contacts that provide them with greater durability.

Pressing the call button is confirmed by an acoustic indicator emitted by the amplifier.

The pushbuttons include a polycarbonate card holder (front access), to house a label with the name of the homeowner and the door number. Integrated lighting that allows you to see the card holders, even in complete darkness.

The street panel includes the OneToOne information module with inductive loop. The "OneToOne" module with inductive loop shows the status of the panel by means of 4 LED icons.

These icons symbolize:

Call.

Conversation.

Door opening.

Busy channel.

In addition, each of the sounds and audio reproduced by the amplifier are emitted by the inductive loop towards the devices of the disabled.

System: DUOX PLUS (2 digital wires)

Technical specifications

Led lighting consumption: 3.5 mA per card holder.

Video:

Sensor: 1/3" color CMOS.

Effective pixels > 340K. (camera captures 720x480)

Minimum external illumination: 0 lux. Since it has LEDs, no additional lighting is required.

Y/N >45dB.

Frame rate 25 fps.

Resolution > 368x288 pixels.

Video Codec: H264 Highline Profile

auto iris

Auto BLC.

Viewing angle 100º horizontal, 80º vertical.

Fisheye correction.

Color night vision through white leds.

Pan & Tilt digital zoom.

Series 4 board.

Plate measurements: 130x199 mm (width-height).

Embedded box measurements: 115x185x45 mm (width-height-depth).

Surface box measurements: 130x199x33 mm (width-height-depth).

Power supply: 18-24 Vdc

Consumption:

Standby: 240mA.

active audio: 560 mA.

IPK-437

Audio power house-street direction: 2W

Audio power street-house direction: 0.15W

Adjustable volume in both directions

Operating temperature: -25 to 70 ºC