• Front of 1.8mm. thick anodized extruded aluminium.
• Backlit numeric keypad with stainless steel covered push buttons
• Selectable acoustic acknowledgement signal on push.
• Light status indication.
• Removable terminal connector for easy wiring.
• Tamper alarm.
• 2 relay outputs (N/C or N/O) with independent remote activation input and panic output (12Vd.c.).
• Remote activation inputs can be enabled/disabled through a programmable code.
• Programmable activation time (1 to 99 sec.) and output mode (single shoot or stable).
• 1,000 codes of 4, 5 or 6 digits. Each code can be programmed to activate a combination of outputs.
• User codes and special codes can be changed without the need to enter into programming mode.
• Access control can be disabled during a period of time after the introduction of a number of wrong consecutive codes.
• Tamper alarm.
• 12V a.c. or 18 to 24V d.c. power input.
• Dimensions:
  • External: 128(W) x 153(H) mm.
  • Embedded: 99(W) x 133(H) x 56(D) mm.

Kit composed of: . N3301/AL access control module. N6001/AL assembling set. NCEV-90CS embedding box. TF-104 transformer. CV-14 12V c.a. lock release.